What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 12:48
It also is a device that limits the change in current flow.
One is “what exactly is in a ‘surge protector’ ? ”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
60 years ago, Ed White went out for walk photo of the day for June 3, 2025 - Space
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
A fuse is a non-resetable over current circuit protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
FromSoft acknowledges issues with Elden Ring Nightreign matchmaking - Eurogamer
nine
eight
One
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Upvotes:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These are simplified answers to the original question, and does not change anything I wrote above.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Ask Ethan: What would the Universe be like without dark matter? - Big Think
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The other is “what does a “fuse” do?”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What does a fuse do?
For this case there are devices called Metal oxide varistors (MOV).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
1-In-100,000 Chance Earth Could Be Yeeted Out Of The Solar System By A Passing Star - IFLScience
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But… the neutral is now “floating” because of the 1 ohm resistance.
Sorting Out Long COVID Symptoms in Babies - Medscape
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It seems Mohan does not understand the difference between a comment and an Answer.
but I think this circuit , shows a few more pieces.
Why do black people prefer thick, curvy women?
At least they know the answer if they wanted it.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is 'the assistant's answer'
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
At one ohm, the resistor has a maximum of 1 watt power.
(Dc diagram shown, AC is similar).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Now when you have a certain ac resistance, then a current flows in a loop.
An AC voltage/ current source, and an ac inductive load.
Here is a simplified AC power diagram.
a photo is worth a thousand words.
Edit 2024–10.
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
I post the exact comment here.
These devices are installed between the “hot” and “neutral” and protective ground.
He then describes the function of a fuse.
In schematic diagrams this is the symbol for a fuse:
2024–10–10[John johnson John Johnson ]
This is where the MOV conducts again, and dissipated the energy.
This one hit behind the barn.
First Sentence:
what exactly is a ‘surge’ protector?
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, what happens?
but this device (an Inductor) … impedes the rapid changes in the current.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
Because the load is inductive, the current lags the voltage.(by a bit).
What is lightning?
He then asserts :
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are two important concepts here.
Barnstars:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
[image of Common-mode choke]
This device then solves the entire problem.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The third is lightning and “how it gets conducted into a home.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There are three different concepts here that are getting confused.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.